When purchasing an electronic patrol system, we need to pay attention to reasonable arrangements and equipment patrol points. For beginners, I don't know where to start. Originally, this was not difficult. The height of the patrol point is generally set at 1.6m-1.8m based on the height of the person, and it is advisable to reach out and touch the patrol point. However, it also needs to be determined based on the on-site environment. Some places do not have any suitable support, so local equipment with the lowest probability of doubt can be arranged. We all know that patrol points are located in hidden areas that are difficult for ordinary people to discover, thus reducing the risk of human curiosity being damaged by human factors. The location of the equipment at the patrol point lies in the rules for security personnel to follow during patrols. The patrol point is the key point that equipment security personnel must inspect to prevent taking shortcuts or even not going to the local area. Then move forward with the quality of service provided by security personnel!
Patrol system software equipment. Generally, manufacturers' software will be accompanied by instructions, and relevant operations can be carried out according to the instructions. The primary setting items include address buttons, rod numbers, lines, plans, assuming there are personnel cards and workbooks, etc. Other functions can be set according to needs.
Due to the widespread use of inductive electronic patrol systems, the climate is unpredictable and the environment has a certain level of humidity. Practice has proven that in the northern regions or during monotonous winter, the occurrence of static electricity is much more common than in the southeastern coastal areas or other seasons. Therefore, in some important places, such as computer rooms, laboratories, and electronic instrument installation and adjustment workshops, it is necessary to consider adhering to a certain humidity, especially for enclosed air-conditioned rooms, which should have equipment to control humidity. Lay anti-static flooring or carpets. Currently, there are plastic flooring or carpet products with certain conductive functions that can be very effective in suppressing static electricity caused by human walking.
In the outdoors, assuming that the cost may be too high or the environment does not allow the installation of plastic sheets and carpets on the floor, it is most useful for patrolmen to wear anti-static wristbands on their wrists, which should have excellent grounding function. This method is the most useful. Perhaps a more commonly used method is to press the wall with both hands for a few seconds before touching the patrol stick, which can export static electricity from the body and prevent it from being transmitted to the patrol stick, preventing abnormal operation of the patrol stick from happening!